Welcome to our website!
  Product List
Home>>Products

Products

Vane Type coalescing device

Vane Type Coalescing Devices are positioned upstream of the demisting device and comprise vanes without any “hooks” or “troughs”. They are utilised when a high separation efficiency and / or a high turndown ratio is required and are positioned upstream of the demisting device. As coalescing devices, they can be utilised in any configuration in both horizontal and vertical separators and are suitable when a Mesh Type Coalescing Device cannot be used due to the potential for fouling.

The difference between the Vane Type Coalescing Device and a Vane Type Demisting Device is that the pre-conditioner is designed to operate at about three times the gas velocity used for a Vane Type Demisting Device. This means that it operates in a flooded condition, which has the effect of enlarging the sizes of the upstream droplets, thereby increasing the amount of liquid removal within the downstream demisting device and improving the efficiency of the gas / liquid separation process.

At low flow rates, the Vane Type Coalescing Device takes over from the downstream demisting device and itself acts as the demisting device. Under these conditions, it no longer operates in the flooded condition but reverts back to its role as a Vane Type Demisting Device

Further, since it provides a pressure drop prior to the demisting device, any flow mal-distribution which exists across the face of the Vane Type Coalescing Device will be significantly reduced before the flow reaches the demisting device. This, again, has a beneficial effect on the gas / liquid separation process. 

Advantages 
·Increases the gas / liquid separation efficiency.
·Improves the flow distribution on the face of the downstream demisting device.
·Provides a wide operational range with a high turndown ratio ≥ 10:1.
·Available in various shapes and orientations.
·Resists fouling.
·Robust construction.
·Has relatively low installed cost.
·Easy to install in both new and existing separators.
·No moving parts, so no maintenance

Application  
·Production Separators 
·Test Separators 
·Gas Scrubbers 
·Gas Knock-out Drums 
·Slug Catchers 
·Flash Drums 
·Process Vessels and Columns 
·Floating Production Units (FPUs).  
 

Head Office

HZ3362, UNIT (S) 2, LG 1, Mirror Tower, 61 Mody Road, Tsim Sha Tsui, Kowloon, Hong Kong
Tel. No.: +852 9582 1582
Email: bruce@apgpc.com

Singapore Office

23 Penang Road #07-12 Regency House Singapore 238465
Tel. No.: +65 6735 8919
Email:jessica@apgpc.com
cynthia@palmical.com

Advanced Petro Gas Process (Tianjin) Co., Limited

No.1801-1802 Building B Mingshijindi, Zhaishang St.Binhai New District, Tianjin
Tel. No.: +86 22 67293500 / (86)18622125751
Email: jamina@apgpc.com

China (Shanghai)Office

No.1688, Xin Jin Qiao Road, Pudong New Area, Shanghai
Tel. No.: (86)13818149202
Email: paul@apgpc.com